1, hot stamping temperature:
Flat hot - silicon mold: 160-190 degrees
Flat hot - metal mould: 130-150 degrees
Hot - silicon mold: 170-190 degrees
Hot - metal mould: 160-180 degrees
2, hot stamping pressure and hot stamping time:
...1, hot stamping temperature:
Flat hot - silicon mold: 160-190 degrees
Flat hot - metal mould: 130-150 degrees
Hot - silicon mold: 170-190 degrees
Hot - metal mould: 160-180 degrees
2, hot stamping pressure and hot stamping time:
...If the print need to use for a period of time, it is suggested that made the cover film processing. Number less than 10 suggested that cold membrane, faster, and do not need to boot fee; More than 10 pieces of advice overheating membrane, the effect is better, and the more quantity, the cheaper unit price.
...What is a thermal transfer? Why use thermal transfer technology? Ink is printed design on all kinds of material goods of the new method, especially suitable for producing small amounts of a variety of personalized and customized products, and contains full color printed pattern of images or photographs. Its principle is to digital pattern through the printer to special thermal transfer printing ink printing on the heat transfer from, again with special transfer printing machine, high temperature and high pressure to design accurate heat transfer to the surface of the goods, finished goods are printed.
...Flocking printing we say at ordinary times, refer to similar cotton fabric or carpet, at first glance doesn't feel a growing pile of printing technology(for example:Man Roland Parts). Also called villi glued seal or fuzz processing, belong to the paper or give textile effects as a means of printing on textiles.
...Different from the Man Roland Parts ,the digital printing unit production cost is higher, therefore, is suitable for using digital printing not many prints in the current circumstances. According to the practical work experience, here some advice in the following types of printing business in the digital printing technology, so that we can achieve the cost, speed, and the balance of the customer satisfaction.
...Fully automatic screen printing machine(Printing Spare Parts for example) maintenance parts:
Air compressor components, won't make too much moisture and oil into the air pressure in the system, avoid the cylinder malfunction and shorten the service life of the cylinder, ensure that compressed air is dry and clean, had better to add freeze dryer.
...As a worker of the printing industry,I'm sure you will be interested in this article about the printing machine(such as the Man Roland Parts ),now just spend some time on this atricle about the Weak current,you will know more about this machine.
...Although the waterless offset printing technology in constant development, but its development speed is far from expected so fast, the main reason is that some of the key technology hasn't been solved yet, such as plate, printing ink, temperature control, etc.
...