Printing Spare Parts

As a worker of the pringting machine(Man Roland Parts ),or you would like to be a good worker of it,you really need to get some knowledge about the printing industry and its products now,just read the article following and you will get some useful information about it.

As time goes on,the market of the printing machine is becoming bigger and bigger,Printing Spare Parts for example,and we have to get more and more useful information about it to make a better future.Wang Luwang, journalism department of graphic communication at the university of the new, the board of supervisors in a Taiwan printing industry association, the relevant government authorities do bid winner printing, for normal or printed information involved in a lot of propaganda standard case, it is the job of the printing industry, have rarely seen printing trade to bid, so I want to talk to the printing trade a prerequisite for the bid preparation work and business planning book production way, because they do not go to tender, naturally can't do this kind of big and small first-hand the case, the government to take part in the project proposal, if not be casually, casually with two pieces of A4 paper nailed on the book in the corner of the needle, seem quite literally weak is also a waste of energy, are difficult to select bid.

As is known to all, printing ink is composed of connection, filling agent, coloring materials and additives of several components. Therefore, in the composition of printing ink cleaner, need both contain organic solvent, and need to contain ingredients having affinity with inorganic compounds and pigments, can according to the principle of "chemical structure similar compatible", in the process of cleaning ink using the emulsifying principle, forming "oil-in-water, water-in-oil emulsion, in order to achieve clean ink roller, blanket, and the ink on purpose.

Do you know somthing about the digital printing machine? There are some difference form the common pringting machie,HeidelBerg Parts for example.The realization of the digital printing to consider the introduction of printing quality of printing equipment, printing speed, handling and after-sales service, to choose to suit the business needs of digital printing solutions. Printing enterprise digital printing machine when the choose and buy must consider the following three basic needs.

It is this way of printing, the printing machine(such as the HeidelBerg Parts ) structure and operation of the four elements to determine the print quality. This is four elements: A, scraper; B, embossing roller; C, ink system; D, drying box.
...

As a worker of the printing machine(Man Roland Parts for example),what do you need to notice? Yes,I'm sure you will have lots to say,but do you know something about the thermal paper? Not all of us I'm sure,so just spend some several minutes to read this article and you will get what it is.There are many type thermal fax machine is using a thermal paper, thermal paper, although cheap, but there are a lot of fake and inferior products. The characteristics of the products is: shorten already very short shelf life bar code printer to print effect. This is because the fake and inferior products of coating is very thin, easily broken and affect the stability, if the environment is bad, not using these products may occur even before thermal paper early to react with surroundings material result in can't use. According to the user's experience, if thermal paper white hyperbole, then this is a cut corners serious product.

Defoaming agent is usually through a mixture of the multicomponent complex. Main of defoaming performance can be enhanced by compound with surfactant. A kind of active matter whether suitable for defoaming, depends on its application conditions. Under acid condition such as stearic acid is a kind of antifoaming agent; In alkaline conditions, it is a foaming agent. Effective at low temperatures, and high temperature will be invalid.

Most of the scanner in the factory has good correction, but due to the difference of manufacturing conditions, the change of the light source color temperature, degree of old and new pointer will affect the scanner. When buying a flatbed scanner, the manufacturer is typically provide a standard transmission or reflection manuscript, including a neutral grey wedge and parts of the shades of color.

1. The color with color problem at a time

Printing production, a color (CMYK) color with difficult, mainly due to the different ink and printer ink color hue, a color digital sample by different proportion of CMYK ink synthetic technological equipment. And when printing CMYK monochrome, add and subtract the ink quantity will only change the color depth, will not change the color hue central printing. Therefore, once the color is wrong, cannot follow to the digital sample.

If you are an old worker of the Man Roland Parts printing machine,then you should know that the Good network version of the production, its technological requirement is relatively complex, first of all, to the picture of exposure (film) read, see is line, surface, or outlet, or all three, so as to determine their exposure time; Second to the photosensitive glue to you also have a certain familiarity (because of sensitive glue is not a manufacturer, so will have their own sensitivity).