Talk about going mainstream – HeidelBerg Parts Walmart’s British subsidiary, Asda, is about to start trialling 3D scanning and printing. Next week, an Asda supermarket in York will offer its customers the chance to be scanned, digitally modelled and turned into an 8-inch ceramic figurine.
It’s being touted as an experience that occurs “while you’re doing your weekly shop,” though in reality the digital model is sent off elsewhere for 3D printing, which is a fairly slow technology. That means customers need to pick it up a week later.
The scanning process only takes two minutes though and, judging from this video, it employs the Artec Eva handheld scanner:
The production line is the engine of modern industry, an extremely efficient process that can churn out thousands of completed products per hour. A famous, yet simple example to demonstrate its efficiency is the production of a humble pin. It was shown how such a simple item could be broken down into a number of discrete tasks, with an individual specializing in each area, and in so doing production was increased dramatically; many times over that of a skilled individual producing the entire product. Since this time, the production line has only become more efficient and streamlined; virtually any product you imagine can be churned out at immense speeds.
Now, many people have suggested that 3D printing can take over a significant percentage of this capacity, this is unlikely for a number of reasons:
The production line creates a fully packaged product ready to be loaded onto a truck and ship, a 3D printer cannot do this, the printing process would need an additional step of removing it from the printer, packaging it, then shipping -- adding cost and time.
The sky may be the limit for some users of 3D printers, but Nasa are trying to go beyond that. It has been testing rocket engine components that have been created using 3D printers.
They have produced a rocket fuel injector using lasers that melt a nickel-chromium allow powder to create the complex design, which had 28 elements for directing and mixing fuel.
Most injectors of this size have around 115 different parts, while the 3D printed injector had just two, meaning it required less assembly.