Fully automatic screen printing machine(Printing Spare Parts for example) maintenance parts:
Air compressor components, won't make too much moisture and oil into the air pressure in the system, avoid the cylinder malfunction and shorten the service life of the cylinder, ensure that compressed air is dry and clean, had better to add freeze dryer.
Three combinations, to guarantee the working pressure within 5-7 kg/cm, daily check whether converter oil cup of oil is enough, pressure release valve need not long time. Should be pushed in the back end, the CPC R68 #, air should be used (i.e., special oil pressure control group).
The other is when to stop working, turn off the power supply should be main switch and the compressed air supply; Speed regulation valve cylinder and axis of each part should avoid magnetic loss; Workbench horizontal slide parts and precision highly cooperate with commonly used components must wd-40 is wiped clean and oil, in case the precision is affected due to any rust.
The whole machine work cycle phase adjustment:
By the manufacturer according to the design of the loop phase diagram strictly adjustment, and wearing a pin or lock.
Operation adjustment:
Guide rail, plate and adjusting working platform parallelism between the three layers: general adjustment on the guide rail or platform benchmark.
1) platform and guide rail shall be parallel, scraping plate is the moving along the guide rail, as both is not parallel, scraper will not always contact platform at a certain pressure, appear even clearance, this has also adjusted the machine before they leave the factory in tune.
(2) silk screen printing plate and platform should be parallel, otherwise the net distance (distance) silk screen plate underside to the printing surface, cause the printing pressure and the screen printing plate deformation, therefore, the flatness of screen frame itself should be guaranteed, generally by the users according to need to put forward specific requirements. To adjust: refers to the screen printing machine for silk screen printing precision adjustment between plate and the calendar. Height adjustment (> 40 mm), before and after adjustment and around (> 20 mm), horizontal Angle adjustment (> 3 °).